TOC 
Network Working GroupA. Swartz
Internet-DraftAaronSw.com
Expires: March 11, 2004September 11, 2003

application/rdf+xml Media Type Registration
draft-swartz-rdfcore-rdfxml-mediatype-03

Status of this Memo

This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on March 11, 2004.

Copyright Notice

Copyright (C) The Internet Society (2003). All Rights Reserved.

Abstract

This document describes a media type (application/rdf+xml) for use with the XML serialization of the Resource Description Framework (RDF). RDF is a language designed to support the Semantic Web, by facilitating resource description and data exchange on the Web. RDF provides common structures that can be used for interoperable data exchange and follows the World Wide Web Consortium (W3C) design principles of interoperability, evolution, and decentralization.



 TOC 

Table of Contents




 TOC 

1. Discussion of this Document

Please send comments to <mailto:www-rdf-comments@w3.org>. To subscribe, send a message with the body 'subscribe' to <mailto:www-rdf-comments-request@w3.org>. The mailing list is publically archived at <http://lists.w3.org/Archives/Public/www-rdf-comments/>.



 TOC 

2. Introduction

RDF is a language designed to support the Semantic Web, by facilitating resource description and data exchange on the Web. RDF provides common structures that can be used for interoperable data exchange and follows the W3C design principles of interoperability, evolution, and decentralization.

While the RDF data model[2] can be serialized in many ways, the W3C has defined the RDF/XML syntax[1] to allow RDF to be serialized in an XML format. The application/rdf+xml media type allows RDF consumers to identify RDF/XML documents so that they can be processed properly.



 TOC 

3. application/rdf+xml Registration

This is a media type registration as defined in Multipurpose Internet Mail Extensions (MIME) Part Four: Registration Procedures[7]

MIME media type name: application

MIME subtype name: rdf+xml

Required parameters: none

Optional parameters: charset

Same as charset parameter of application/xml.

Encoding considerations:

Same as charset parameter of application/xml.

Security considerations:

Security considerations include many of those described in section 10 of RFC 3023[5] and more, due to the semantic nature of RDF. RDF documents may make assertions about anything and it is expected that future work with Digital Signature and "Web of Trust" will make it more clear how to build secure RDF systems.

Interoperability considerations:

It is recommended that RDF documents follow the newer RDF/XML Syntax Grammar[1] as opposed to the older RDF Model and Syntax specification[4].

RDF is intended to allow common information to be exchanged between disparate applications. A basis for building common understanding is provided by a formal semantics[3], and applications that use RDF should do so in ways that are consistent with this.

Published specification: see RDF/XML Syntax Grammar[1] and RDF: Concepts and Abstract Syntax[2] and the older RDF Model and Syntax[4]

Applications which use this media type:

RDF is device-, platform-, and vendor-neutral and is supported by a range of Web user agents and authoring tools.

Additional information:

Magic number(s): none

Although no byte sequences can be counted on to consistently identify RDF, RDF documents will have the sequence "http://www.w3.org/1999/02/22-rdf-syntax-ns#" to identify the RDF namespace. This will usually be towards the top of the document.

File extension(s): .rdf

Macintosh File Type Code(s): "rdf "

For further information:

Dan Brickley <danbri@w3.org>

RDF Interest Group <www-rdf-interest@w3.org>

More information may be found on the RDF website: <http://www.w3.org/RDF/>

Intended usage: COMMON

Author/Change controller:

The RDF specification is a work product of the World Wide Web Consortium. The W3C and the W3C RDF Core Working Group have change control over the specification.



 TOC 

4. Fragment Identifiers

The rdf:ID and rdf:about attributes can be used to define fragments in an RDF document.

Section 4.1 of the URI specification[6] notes that the semantics of a fragment identifier (part of a URI after a "#") is a property of the data resulting from a retrieval action, and that the format and interpretation of fragment identifiers is dependent on the media type of the retrieval result.

However, in RDF, the thing identified by a URI with fragment identifier does not bear any particular relationship to the thing identified by the URI alone. This differs from some readings of the URI specification[6], so attention is recommended when creating new RDF terms which use fragment identifiers.

More details on RDF's view of fragment identifiers can be found in the section "Fragment Identifiers" of the RDF Concepts document[2].



 TOC 

5. Historical Considerations

This media type was reserved in RFC 3023[5], saying:

RDF documents identified using this MIME type are XML documents whose content describes metadata, as defined by [RDF]. As a format based on XML, RDF documents SHOULD use the '+xml' suffix convention in their MIME content-type identifier. However, no content type has yet been registered for RDF and so this media type should not be used until such registration has been completed.



 TOC 

6. IANA Considerations

This document calls for registration of a new MIME content-type, according to the registration template in section 2.



 TOC 

7. Acknowledgements

Thanks to Dan Connolly for writing the first version of this draft[9], to Andy Powell for reminding us we needed one, to Marshall Rose for his xml2rfc converter, and to Graham Klyne, Jan Grant, and Dave Beckett for their helpful comments on early versions of this document.



 TOC 

References

[1] Beckett, D., "RDF/XML Syntax Specification (Revised)", W3C rdf-syntax-grammar, March 2002.
[2] Klyne, G. and J. Carroll, "Resource Description Framework (RDF): Concepts and Abstract Syntax", W3C rdf-concepts, January 2003.
[3] Hayes, P., "RDF Model Theory", W3C rdf-mt, January 2003.
[4] Lassila, O. and R. Swick, "Resource Description Framework (RDF) Model and Syntax Specification", W3C REC-rdf-syntax, February 1999.
[5] Murata, M., St.Laurent, S. and D. Kohn, "XML Media Types", RFC 3023, January 2001.
[6] Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", RFC 2396, August 1998.
[7] Freed, N., Klensin, J. and J. Postel, "Multipurpose Internet Mail Extensions (MIME) Part Four: Registration Procedures", BCP 13, RFC 2048, November 1996.
[8] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[9] Connolly, D., "A media type for Resource Description Framework (RDF)", March 2001.


 TOC 

Author's Address

  Aaron Swartz
  AaronSw.com
  349 Marshman
  Highland Park, IL 60035
  USA
Phone:  +1 847 432 8857
EMail:  me@aaronsw.com
URI:  http://www.aaronsw.com/


 TOC 

Full Copyright Statement

Acknowledgement